How To Turn Off Dji Drone

If you fly a DJI drone then yous may accept run into problems with geofencing, and not knowing how to turn it off.

In this guide, we'll walk y'all through how to identify whether where yous want to fly is in airspace that requires unlocking, the two different types of geofencing DJI uses, and what to do to unlock each 1 of them.

Here'due south our YouTube video, but if you'd prefer to read through this guide, please scroll below:

How to Unlock DJI Geofencing Using the GEO System

Is Your Mission Located in a Geofenced Area?

Showtime past using DJI's Fly Safe Geo Map to come across whether the area in which you want to fly is located in a geofenced "zone" that will require unlocking.

To do this, enter the accost of the location where you want to fly in the search box in the summit left of the interactive map that appears on the Geo Map page, and and then click on the area to populate the geofencing zones in the location where you want to fly.

Quick note: Brand sure to check off the "Warning Zones" and "Enhanced Warning Zones" boxes below the map to make certain all of the geofencing information relevant to your mission will exist included in your search.

Color Coding

Once y'all input the location where you desire to fly, you'll notice color-coding indicating the unlike kinds of geofencing zones that cover the area (these colors represent with the "DJI GEO Zones" you see listed horizontally below the map in the screenshot above).

Red zones bespeak restricted areas, which require a Custom Unlock. We'll walk you through how to asking a Custom Unlock in the next section.

Gray zones indicate areas with altitude restrictions and are usually establish well-nigh airport runways. Due to safety reasons, these restrictions cannot be turned off.

Bluish zones bespeak areas where flying is risky just up to the discretion of the pilot, and may exist flown after completing a Cocky Unlock. We'll walk you through how to perform a Self Unlock in the side by side section.

Xanthous zones bespeak areas where flying is potentially dangerous but does not require any unlocking (these are those Warning Zones and Enhanced Alert Zones areas). When taking off in these areas, a warning will be shown to pilots forth with a asking for the airplane pilot to take responsibility for flight in the expanse by checking a box.

Types of Unlocking Y'all Can Do

As we've already noted, there are two types of unlocking yous can perform on your DJI drone: a Cocky Unlock (associated with blueish zones) and a Custom Unlock (associated with red zones).

Cocky Unlock zones can be unlocked fairly hands by clicking through a series of steps, while Custom Unlock zones require proof of say-so (via LAANC or other documentation, such every bit a COA).

Custom Unlock

A Custom Unlock requires proof of authority for flight in the restricted area and can only be requested via DJI'due south website. Make sure to secure your Custom Unlock before y'all go into the field—don't arrive on-site and look to get a Custom Unlock right away.

Earlier yous commencement the process listed below, make sure to secure authorisation to wing in the surface area where you are requesting a Custom Unlock, since you'll demand to present this authorization to DJI in club to accept your unlock request granted.

[To learn more than about how to get airspace authorization see this step-by-step resource nosotros created .]

How to Perform a Custom Unlock

• Go to DJI's Custom Unlock webpage (https://www.dji.com/flysafe/custom-unlock) and log into your DJI account.
• Click 'Unlocking Requests.'
• Fill up out the 'Basic Information' form — This form requires data such as proper noun, verified DJI account, flight controller serial number, functioning details, authorization documentation, etc. (see below instructions to discover your serial number).
• After entering all information in the 'Basic Information' course, click 'Adjacent Stride.'
• At present, the 'Unlocking Surface area' page will open up.
• Select the model of drone for this operation from the drop-down menu.
• Using the search bar within the Geo Map, enter the flying location address.
• Select the reddish pin that covers the zone you want to unlock (retrieve, red = Custom Unlock zone).
• On the right-paw side of the Geo Map, enter the proposed flight radius, flight altitude, and the proper name of the unlocking zone.
• Review the data, if everything looks correct click 'Confirm' and enter the verification code when prompted and click 'Confirm.'
• Hold to the terms and weather condition and click 'Agree.'
• Now you wait. DJI will review your Custom Unlock request and reply, usually within i hour of submission. If your asking is approved you volition receive an email confirmation letting you know. If you experience delays, you lot tin can contact DJI support at flysafe@dji.com to check on the status of your request.

Self Unlock

Self Unlock can be done either earlier you fly or while you're at the location where yous plan to fly. Here's how to practice each one.

How to Perform a Self Unlock Earlier You Fly

• Go to DJI's Self Unlock webpage (https://world wide web.dji.com/flysafe/self-unlock) and log into your DJI account.
• Select the model of drone for this functioning from the drop-downwards bill of fare.
• Using the search bar within the Geo Map, enter the flight location accost.
• Select the blue pin that covers the zone y'all want to unlock (remember, blue = Cocky Unlock zone).
• Enter your flying controller series number (spring down to this department on how to find your series number).
• Choose the date for your flight and click Submit (note: the unlock will start at midnight on the day you choose and volition stay in place for the side by side 72 hours).
• Concur to the terms and weather condition and click 'Hold.'
• Utilise either the phone number or credit carte number associated with your DJI account to verify your identity (if you lot utilise your phone number you'll take to enter an hallmark number received via text, so make sure to accept your phone nearby).
• If the verification is successful, a popup will bespeak 'Verication Complete' you can then click 'Proceed.'
• Afterwards securing your cocky unlock with the steps listed to a higher place, you'll need to do the post-obit: Become to Camera View, select General Settings, and select Unlocking Listing in the DJI Go or DJI Get 4 app to ostend your flight license has been downloaded. Information technology's important to do this earlier going into the field since y'all need an internet connection to have these steps and if you take a poor connection and tin can't do them, you may not exist able to fly. See this page on the DJI website for more information: https://www.dji.com/flysafe/self-unlock.

How to Perform a Self Unlock While on Location

• Open up the DJI Go app.*
• When the flight restriction warning appears click "Aye."**
• Utilise either the phone number or credit card number associated with your DJI business relationship to verify your identity (if yous apply your phone number you'll have to enter an authentication number received via text, so brand sure to have your phone nearby).
• Click "Confirm" to unlock the Cocky Unlock zone where you want to fly.

*Depending on the surface area, in lodge to trigger the Cocky Unlock prompt while on location you must have internet admission (which means you won't be able to do Self Unlock using an iPad that does not accept internet access).

**You may demand to perform a CSC maneuver to trigger the Self Unlock prompt to appear. If the prompt is not appearing, attempt doing a CSC maneuver to trigger the prompt.

Here'southward how to find your flight controller serial number

• Connect to the DJI Become 4 app with the controller and your drone.
• In the pinnacle correct corner, click on the three dots for Full general Settings.
• Scroll to the bottom, click on Well-nigh, and your serial number volition appear there.

Pro Tip: Although DJI documentation says that Cocky Unlock only works on a desktop browser, if you are in the field and only have an iPhone yous can employ Safari to practise a Self Unlock by clicking the share button at the bottom of the screen, then selecting "request desktop site." Doing this will allow y'all to do a Self Unlock on the DJI Self Unlock webpage while in the field.

Hat tip to Chris Quango of C2 Photography for sharing the pro tip above as well as several other primal points that helped improve this guide. Thank you Chris!

For more information on unlocking your DJI drone, spotter this video from DJI:

How to UNLOCK GEO Zones on DJI Drones

Source: https://www.dronepilotgroundschool.com/dji-unlocking-geofence/

Share this post